Pioneer VSX-D409 Operating Instructions Manual page 30

ie
s
Use to put the receiver/remote control in the
stated mode.
For other equipment controls, see "Controlling
the Rest of Your System" on pages 45-49.
® RECEIVER button (see page 15)
Use this button when setting up the surround
sound for the receiver.
Number/Mode buttons (see pages 22,
42)
Use the number buttons to select the radio
frequency in tuner DIRECT ACCESS mode or
the tracks in CD, DVD mode etc.
Also, buttons marked with the following names
have special functions. !f you try to use one of
these functions but the display flashes it means
that function cannot be used in the current mode
(for example DSP modes cannot be used when
5.1 CH setting is on).
OO (see pages 37, 40)
Use to put receiver in Dolby Digital, Dolby
Surround and DTS modes. To use first press the
RECEIVER button then operate this button.
DSP MODE (see pages 38)
Use to put receiver in one of the DSP mode
use first press the RECEIVER button then
operate this button.
MIDNIGHT (see page 39)
Use to put receiver in Midnight mode. To u:
first press the RECEIVER button then opera
this button.
5.1CH (see page 39)
When the DVD/LD or DVD 5.1 CH function
selected each press switches the DVD/LD i
between DVD/LD and DVD 5.1 CH. To use:
press the RECEIVER button then operate th
button.
CHANNEL SELECT (see page 21-note)
Use to select a speaker when setting up the
surround sound of the receiver. To use first
press the RECEIVER button then operate th
button.
TEST TONE (see page 21)
Use to sound the TEST TONE when setting
the surround sound of the receiver. To use f
press the RECEIVER button then operate th
button.