Pioneer VSX-D409 Operating Instructions Manual page 24

controlled, enter the 3 digit preset code.
When you enter the preset code, the remote emits a power ON/OFF
signal. If the component turns ON or OFF, you have entered the
proper code.
i
lf the component does not turn ON or OFF and there is more than
i
one preset code, press <J or > to select another code in step 3 or try
:
inputting another code (starting again from step 2).
Some manufacturers use several sets of remote control signals and
the first code may not correspond to your component.
oes
A 8!
on
ery
PUSH 4YOS 8} — |] PusH 4o9 8,
Ens
Repeat steps 2 through 4 to assign preset codes for as many
components as necessary.
mode.
The remote contro! returns to the previous operation mode.
facturer code to "111" in the preset mode.
~~
* All codes enrolled in the manufacturer code list can be set
even if a code is not displayed.
« TUNER cannot be preset.
¢ lf no commands are entered the receiver automatically exits
the preset code mode after 20 seconds.
24
En