Table of Contents
Advertisement
Electrical Supply
WARNING: This appliance must be earthed.
Fuses
Your appliance comes fitted with a plug and a 13A fuse. If you need to replace the fuse, only
those rated at 13A and ASTA approved to BS1362 should be used. If you lose the fuse cover, a
replacement may be obtained from your local Hotpoint authorised Service Centre or Electricity
© company. Correct replacement is identified by colour coding or the marking on base of plug.
WARNING: Do not use plug unless fuse cover is fitted.
Changing the Plug
Cut off and dispose of the supplied plug if it does not fit your socket.
WARNING: To avoid a shock hazard do not insert the discarded plug into a socket
anywhere else.
IMPORTANT: WIRES IN THE MAINS LEAD
ARE <OLOURED IN ACCORDANCE WITH
THE FOLLOWING CODE:
Green/Yellow
-
Earth
Blue
-
Neutral
` Brown
-
Live
i
If you change the plug, the colour of vvires
in the mains lead may not
correspond vvith the colour of the
markings identifying terminals in the
piug. You should therefore vvire it as
shovvn (Fig 1).
Changing the Mains Lead
13A ASTA approved
fuse to BS1362.
Green and yellow (Earth)
wire to terminál
marked ʻE;
symbol, Gor
coloured green
Brown (Live)
and yellow.
to terminal
marked 'L'or
Blue (Neutra:
coloured red.
wire to terri
marked 'N' or
A special lead can be ordered from Hotpoint Service UK: 08709 066 066 or
Republic of Ireland: 1850 302 220
If you have damaged the existing lead or require a longer one a charge will be made. It is
strongly advised that this work is carried out by a qualified electrician.
CE marking certifies that this appliance conforms to the following EEC directives:-
C
Low Voltage Equipment - 72/23/EEC & 93/68 EEC
Electromagnetic Compatibility - 89/336/EEC, 92/3 1/EEC & 93/68/EEC
Advertisement
Table of Contents
