Typical Installation
Series Progressive System
The installation shown in F
Contact your Graco distributor for assistance in designing a system.
F
. 2
IG
Key:
A
Lubricant Outlet Connection†
B
Pump†
C
Ignition Switch*
D
High-Pressure Lubricant Supply Lines*
F
Lubrication Controller*
G
Fill Port (not used with Auto-Fill Shut Off)
H
Overflow Port (not used with Auto-Fill Shut Off)
J
Breather Vent
K
Reservoir
M Motor
T
Primary Divider Valve*
U
Secondary Divider Valve*
V
Bearing
* User Supplied
8
. 2 is only a guide for selecting and installing system components and accessories.
IG
†The pump outlet requires modification to convert an Injector
based system to Series Progressive system. Graco offers
Dyna Star HF and HP Outlet Adapter Kits 77X543 rated 4000
psi (27.58 MPa, 275.8 bar) and 77X544 rated 5000 psi (34.47
MPa, 344.7 bar). Contact Graco Customer Service or your
local Graco distributor to identify the correct kit for the
installation location.
332540K