Customizing The Lens Cursor; Testing The Lens Cursor - Wacom Intuos4 Large User Manual

CUSTOMIZING THE LENS CURSOR

To modify your Intuos4 Lens Cursor button settings, use your lens cursor to open the Wacom Tablet control
panel and select the M
menus.
The buttons are chordable; you can press two or more buttons simultaneously. For example, if you program
one button to simulate the C
a C +A is simulated.
TRL LT
Note: To configure the lens cursor for left-handed use, simply reassign the button functions as needed.

TESTING THE LENS CURSOR

1. With the D
IAGNOSTICS
the buttons by clicking each button. A tablet status LED should brighten, and the S
change for each button you click.
2. When you are done, click on the C
Contents
tab. Then select a
OUSE
key and another to simulate an A
TRL
dialog box open, place the Intuos4 Lens Cursor on the tablet active area and test
button to exit the dialog box.
LOSE
Contents
Index
function to perform for each button from the pull-down
LT
1 2 3
5 4
Index
keystroke, when you press both buttons
WITCHES
76
state should
76