Testing Your Tools - Wacom Intuos4 Large User Manual

TESTING YOUR TOOLS

If an input tool does not work as you expect, first open the Wacom Tablet control panel and check the
assigned functions or reset the tool to its default condition.
• To quickly return a tool to the default settings, remove it from the T
list's [ – ] button.
• After the tool has been removed, place it back onto the tablet. The tool will be added back to the T
with its default settings.
To test your input tools:
• In the Wacom Tablet control panel, click on the A
D ... button. The D
IAGNOSE
hardware and pointing devices.
• If you have more than one tablet connected to your system, in the T
for which you are testing your tool.
• Use the information presented in the D
Note: When testing your tool buttons, if a button is set to R
when the button is pressed. In this case you may want to change that button function before testing.
Contents Index
dialog box displays to show dynamic information about the tablet
IAGNOSTICS
IAGNOSTICS
Contents Index
list by clicking on the control panel
OOL
button. In the dialog box that appears, click on the
BOUT
ABLET
dialog box when testing your tablet and tools.
M or O
ADIAL ENU PEN
I column select the tablet
NFO
/R ..., that function will occur
UN
Testing a pen
Testing the Touch Ring
Testing the ExpressKeys
Testing the mouse
56
list
OOL
56