Wireless Troubleshooting - Airlink101 AMPS240W Quick Installation Manual

Section 5

Wireless Troubleshooting

If you are experiencing problems with the wireless connection (print server
does not appear when you click discover, print jobs do not consistently
work/finish, only able to communicate with the print server intermittently) you
will want to tune your router's signal by changing channels on the router.
You do not need to change the channel on the print server, it will automatically
pick up the new channel after you unplug the power and plug it back in.
Your router has 11 different channels to choose from. Start with channel 1 and
work your way up. Each time you change the channel on the router, make sure
that you unplug the power from the print server and plug it back in. Keep going
through the channels until you find one that gives you a stable connection.
To check if the print server is connected wirelessly, disconnect the networking
cable from the print server and open the PS-Link software, then click on
Discover. If your print server shows up, the wireless connection is working.
For instructions on changing channels, refer to the documentation that came
with your router.