Table of Contents
Advertisement
Section 7
The following section describes how to setup the Print Server for wireless printing. It is strongly
recommended that you test the Print Server with a wired connection first before moving on to configure
wireless printing.
Note:
You should use a wired connection to configure the following wireless settings before unplugging
the network cable from the Print Server.
Step 1
Open the web browser and type in the IP address of your Print Server. (Default is 192.168.1.254)
Step 2
Verify the Printer Status is On line.
Step 3
Click on Configuration and then Wireless.
Configuring Wireless Printing
Advertisement
Table of Contents
