Maytag MDE20PDFGW Installation Instructions Manual page 22

CODE
L.00 PRICE SUPPRESSION OPTION *
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. This option causes the
customer display to show 'AVAILABLE' or 'ADD'
rather than the amount of money to add. (Used
mainly in debit installations.)
L.00 Not Selected 'OFF'.
L.PS Selected 'ON'. Press the DELICATES keypad
once for this selection.
→ Press the NORMAL keypad once to advance to next code.
n.CE CLEAR ESCROW OPTION *
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. When selected, money held in
escrow for 30 minutes without further escrow or
cycle activity will be cleared.
n.CE Selected 'ON'.
n.00 Not Selected 'OFF'. Press the DELICATES keypad
once to deselect this option.
→ Press the NORMAL keypad once to advance to next code.
CONTROLS SET-UP THROUGH USB
To access the USB setup menu, navigate to set-up code
2.xx (special pricing option). Pressing HEAVY DUTY keypad
activates the help mode sub-menu. The first sub-mode within
the help mode is USB option. Press HEAVY DUTY keypad at
any time to exit help mode.
Submode Description
USB While on this screen, press
the HEAVY DUTY button to
enter into USB menu. USB
menu allows for software
update and import/export
machine settings.
USB MENU
To access USB menu enter into Help Mode. While on the USB
screen press the HEAVY DUTY key. To advance through the
USB sub menu, use the NORMAL key. The DELICATES key
is the Select key. Press the HEAVY DUTY keypad at any time
to exit USB Menu. See Page 23 for location of the USB Port
on the appliance and instructions for how to install a USB
Stick onto the appliance and to remove a USB stick from the
appliance.
CODE
U0.00 USB drive Inserted? (Status only)
U0.00 This will be displayed if USB drive is NOT
detected.
U0.01 This will be displayed if USB drive IS detected.
Press the NORMAL key once to advance to next code.
U1.00 Programming Mode
U1.00 This will be displayed if USB drive not detected.
22
EXPLANATION
Note
Allows user
to enter USB
menu. See USB
MENU section
for more info.
EXPLANATION
Code
U1.01 This will be displayed if USB drive is detected.
If you wish to reprogram the controls Press
the DELICATES keypad 3 times. Display will
toggle between U1.01 and ProG while updating
ACU or U1.01 and --.-- while updating UI is in
process. Please wait until process is complete,
this could take several minutes. After software is
successfully downloaded to machine, the control
could take several minutes to reset. After reset
is complete the machine will return to customer
mode or service mode depending on Service
Switch status.
FCE4 or If the software programming was unsuccessful
FCE5 the display will toggle between U1.01 and FCE4
or FCE5.
Press the NORMAL key once to advance to next code.
U2.00 Export Machine Settings to USB Drive.
U2.00 This will be displayed if USB drive is not detected.
U2.01 This will be displayed if USB drive is detected. If
you wish to export machine settings to USB drive
press the DELICATES key 3 times. Display will
toggle between U2.01 and --.-- while export in
process.
donE Display will toggle between U2.01 and donE when
export finished successfully.
FCE4 or If the export was unsuccessful the display will
FCE5 toggle between U2.01 and FCE4 or FCE5.
Press the NORMAL key once to advance to next code.
U3.00 Import Machine Settings from USB Drive.
U3.00 This will be displayed if USB drive is not detected.
U3.01 This will be displayed if USB drive is detected.
If you wish to import machine settings from
USB drive to machine press the DELICATES key
3 times. Display will toggle between U3.01 and
--.-- while import in process.
donE Display will toggle between U3.01 and donE when
import finished successfully.
FCE4 of If the import was unsuccessful the display will
FCE5 toggle between U3.01 and FCE4 or FCE5.
Press the NORMAL key once to advance to next code.
U4.00 Export Machine Audit Data to USB Drive.
U4.00 This will be displayed if USB drive is not detected.
U4.01 This will be displayed if USB drive is detected.
If you wish to export machine audit data to USB
drive press the DELICATES key 3 times. Display
will toggle between U4.01 and --.-- while export in
process.
donE Display will toggle between U4.01 and donE when
export finished successfully.
FCE4 or If the export was unsuccessful the display will
FCE5 toggle between U4.01 and FCE4 of FCE5.
END of SET-UP PROCEDURES
EXIT FROM SET-UP MODE
Single-Load Models: Reinstall access door.
Explaination