Adding To A Check - Casio TK-2300 Operation Manual

Advanced Registration Functions
Adding to a Check Example
Check# 1234
Table# 33
Tag Qty
DEPT 1 $10.00
DEPT 2 $25.00 1
DEPT 4 $18.00 2
Operation Receipt
INSERT SLIP 1234 (a J® (™% J® 1000 (47)
2500 1800 (=) C2") C= J® REMOVE OLD CHECK «= A234
SLIP SUBTOTAL
"55.50
DEPARTMENT 2-10.00
1. Input a check number to recall the check DEPARTMENT = .25-00
memory and feed the slip using the autom DEPARTMENT } =18.00
line find function. Errors occur if the input DEPARTHENT 4-18.00
check number does not exist in memory SUBTO seo én
or if the check number is not input when NB SERVICE FEE +0050
it is programmed as compulsory. . bons
2. Perform this operation to check the Neu ee oa
previous subtotal.
3. Press the New Balance key to temporarily
finalize the transaction. Checks opened
using the New Check key must be
finalized using the New Balance Key, and
no by using the Cash Amount Tendered,
Charge, Check Tendered, or Credit key.
e The table number is stored in the check memory so its input is not
required in this operation even if table number input is preset as
compulsory. Table number input after inputting the check number may be
performed, however, without generating an error.
¢ Once a check is opened under a number in a certain mode (Reg 1 or Reg
2), the same mode must be used to make additions to the check.
69