Table of Contents
Advertisement
Programming your logo
The logo is a means of identifying your unit. Your logo may consist of alphanumeric
letters and symbols. Your programmed logo will be printed on the top of all pages
transmitted from your unit.
Your Logo
Your Telephone Number
Number of Page
FAX CORRESPONDENCE
ТО.: Мг. MATSUSHITA
DATE: June 5,1990
FROM:
PANASONIC COMPANY
QUR TEL. NO.: 123-4567
Usually the logo is a company, division or personal name in an abbreviated form.
Up to 30 characters can be entered as your logo.
To enter each character, select the correct code (2 digits) referring to the Character
Code Table on page 1-18, and program as shown below.
1
CS
Press the PROGRAM
button.
The PROGRAM indicator lights.
Press "Ж", then "02" for your logo
setting.
Enter your logo by using the dial keypad.
án
F3
Example: If you want to program the logo as
"COMPANY АВС", press "32 44 42
45 30 43 54 01 30 31 32".
E
To print out your logo for confirmation during
C s)
programming, press the START/COPY button.
When you have finished, press the SET
button to store the programming in
memory.
|
тне
operation.
EA
The PROGRAM indicator
goes out.
1-17
Advertisement
Table of Contents
