Table of Contents
Advertisement
Do not use the following types of documents or it may jam. Маке a copy of such
documents and feed a copy into the unit.
ePaper with chemically treated surfaces such as carbon paper or сагропіеѕѕ
duplicating paper
Heavily curled, creasy or torn paper
ePaper with a coated surface
eSmall size paper such as a slip or voucher
eThin paper less than 45 g/m? (12 pounds)
eThick paper over 90 g/m? (24 pounds)
ePaper whose contrast between the print and the background is faint
ePaper whose printing on the reverse side can be seen through from the front (e.g.
newspaper)
Remove clips, staples or other similar objects from a document before feeding it into
the unit.
Make sure that any ink or paste on the document is completely dry before feeding it
into the unit.
Note:
ФА document whose length exceeds 600 mm (235/8") cannot be transmitted. When
you feed such document, the unit stops transmitting and a long beep will be heard.
If this happens, press the STOP/CLEAR button and remove the document.
eif a document is electrostatically charged, the automatic document feeder may not
function properly.
Document loading
Place the documents on the tray with facing down.
After aligning the documents, adjust the document guide according to their width.
Resolution and contrast
You can set the following functions depending on the quality of an original.
Set the functions before transmission or copying. If you set them during
transmission, they will be effective from the next sheet to be transmitted.
225
FINE is suitable for originals written with small
characters.
|
Press the FINE button. The FINE indicator lights.
LIGHT ORIGINAL is useful when tansmitting or
copying originals with faint writing.
Press the LIGHT ORIGINAL button. The LIGHT
ORIGINAL indicator lights.
2-2
Advertisement
Table of Contents
