Program Utilities; Recall A Program; Save A Program - Martin Audio DX0.6 User Manual

Program utilities

From the program utilities menu, you can choose:
Recall a program (page 16)
▪
Save a program (page 16)
▪

Recall a program

This allows you to recall a system preset or to recall a
preset that you have saved previously.
To recall a program
1. Press PM3 to display the Utility Menu.
2. Rotate PM1 until Program Utilities appears on the
bottom line of the screen. Then press PM1.
3. Rotate PM1 until Recall a Program appears on the
bottom line of the screen. Then press PM1.
4. Rotate PM1 until the program to recall is shown on
the screen.
5. Press PM1. The screen will show [Enter] To Recall.
6. Press PM1 to confirm the program recall.
7. If you've finished, press PM2 twice to exit the menu
system.

Save a program

This allows you to save your system settings to one of the
32 presets.
There is only one set of 32 presets, so when you save a
setting to a preset you will overwrite the supplied factory
preset. If necessary, you can restore the factory settings.
For details, see Set factory value (page
To save a program
1. Press PM3 to display the Utility Menu.
2. Rotate PM1 until Program Utilities appears on the
bottom line of the screen. Then press PM1.
3. Rotate PM1 until Save a Program appears on the
bottom line of the screen. Then press PM1.
16
4. Rotate PM1 until the appropriate preset location
appears on screen. For example, to store the your
settings as preset 32, rotate PM1 until P32 appears
on screen.
5. Press PM1 and Set Program Name will appear on
screen.
6. Edit the name in the same way as for input names. For
details, see step 3 and 4 of
The only difference is that program names can be up
to 16 characters.
7. Press PM1. The screen will show [Enter] To Save.
8. Press PM1 to confirm.
9. If you've finished, press PM2 twice to exit the menu
system.
13).
DX0.6 User Guide
Saving a program will overwrite the
current settings for this preset.
Input name (page 21).