Sony RDR-HX900 Operating Instructions Manual page 80

Program Edit
You can select scenes from a DViDigital8 fore, at
tape, and then automatically record selected
scenes to a disc of your choice.
To use this function, you will do the tbllowing:
Connect your digital video camera and
prepare for record ng
!,
ISelect and edit the scenes you want to dub I
Using the recorder's remote control, fast forward
or rewind the tape to select the scenes. At this
point, the selected scenes are not copied to the
disc. The recorder only remembers the IN and
OUT points of the scenes that you selected tbr
dubbing. You can also reset, erase, or change the
order of the scenes.
lDub
the selected scenes to a
disc I
A_er you have selected the scenes, _e recorder
will fast forward and rewind the tape
automatically and record the scenes to a disc of
your choice.
41,Howchapters are created
The dubbed contents on the disc become one title,
and the title is divided into chapters. For a DVD-
RW (VR mode) and the HDD, every shooting on
the tape and each selected scene becomes a
chapter on the disc (Auto Scene Chaptering
function). For other discs, the recorder divides the
title m either 6 or 15-minute intervals, according
to the setting in "Auto Chapter" in Featnres Setup.
2
SYSTEM .......
MENU
*-/f/l/"*,
ENTER
_)
• REC
STOP
Follow steps 1 to 5 of "Preparing for
recordingusingthe DV INjack" (page 77),
andpress SYSTEMMENU.
Select "DV/D8 EDIT," and pressENTER.
The display asks if you want to start selecting
scenes.
ScenesSelection
Do you wcmt to seect a scer, e?
• If you have previously saved a program, the
display asks if you want to edit an existing
program or to create a new program. To
resume editing the existing program, select
"Saved Data," and go to step 6.
3
Select "Start," and press ENTER.
The display for setting the IN point (start of
the scene) appears.
The scene starts to play in the back_l_[_ltX 900
2-187-189-11(2)
Select scene (Set IN point)
OUT
80