Table of Contents
Advertisement
Caring for Your Microwave Hood Combination &
Caring for the filters
The grease filters should be removed and
Rinse well and shake to dry. Do not
cleaned often, at least once a month.
use ammonia or place in a dish-
P
iy
washer. The aluminum will darken.
NOTE: If your microwave hood combination
is installed to recirculate air, the charcoal
filter (Part No. 4158314 [black], 4158439
[white] or 4378403 [almond]) should be
replaced every 6-12 months. The charcoal
filter cannot be cleaned.
4. To replace grease filters, slide filter in
the frame slot on one side of the opening.
Push filter upward and push to the other
side to lock into place.
1. For your personal safety, turn off the
electric power at the main power supply.
5. To remove charcoal filter: remove the
vent cover mounting screws.
6. Tip the cover forward, then lift out to
2. To remove grease filters, slide each
reve:
filter to the side. Pull filters downward
and push to the other side. The filter
will drop out.
7. Lift the back of the charcoal filter. Slide
;
the filter straight out.
3. Soak grease filters in hot water and a
mild detergent. Scrub and swish to
continued on next page
remove embedded dirt and grease.
49
Advertisement
Table of Contents
