JVC LT-42P789 User Manual page 60

Screen is 80% black • The Closed Caption Text mode is on Turn it off in the Closed Caption Menu, page 29.
Stereo or bilingual • Make sure the MTS settings are correct. See page 37.
programs can't be
heard
Static electricity • It is normal to feel static electricity if you brush or touch the screen.
You hear occasional • It is normal for the TV to make crackling sounds when first turned on or off Unless
crackling sounds the sound or picture become abnormal, this is fine.
The picture is slightly • Change the picture format setting on your external device to 10801 or other resolution.
cut off when you use
lg80p format only
The screen • This occurs when you select a digital menu when your input source is from the HDMt
disappears except for connection. Press the menu button.
the menu screen
My HDMI device • This JVC television can accept a variety of HD signals, including 720/60p, 1080/60i and
doesn't work or 1080/60p. It does not accept a 1080/24p signal. Please note that in some cases, a Blu-ray
doesn't work properly or HD-DVD may onty offer the choice of 108g/6gi or 1080/24p. In this case, it is necessary
to choose the 1080/60i output. Please refer to your Blu-ray/HD-DVD manual for complete
details on choosing the correct output.
"Weak Signal" • This OSD appears when the digital channel that you have selected is too weak to receive or
appears no signal is being detected for that channel.
"No Program" • It appears when that channel is not receiving a signal and you have the Noise Muting
appears function OFF and you have a single screen. It moves automatically every two seconds to
prevent the screen from burn-in
• Even if"NO PROGRAM" appears on the screen, your timer functions and auto shut off
functions that you set, are still active
• If you are watching an analog channel, NO PROGRAM does not appear.
The following are not malfunctions.
• The television may make a creaking sound if the temperature of the room or the temperature
of the inside of the television changes. If there is no problem with the screen or sound, then
there is no need to worry.
• The picture may be temporarily disturbed and noise may be seen on the screen if the power
is turned on immediately after it has been turned off. This is not a malfunction.
60