Programming Your Remote - JVC LT-42P789 User Manual

Programming Your Remote
You can program your remote control to operate your external devices, using the instructions
and codes on pages 52 - 58.
1) Manually turn on the device.
2) Change the remote control mode according to the device by pressing the MODE button.
Refer to the following list for which mode to use.
3) Find the remote control code for your device. See pages 54 - 58.
4) Set the remote code.
®®®
@
Press and hold
Enter the four digit number
5) Point the remote at the device and press power. If your device did not turn off or respond, try
another code.
Notes:
• If your device doesn't respond to any of the codes listed or is not listed, see page 52.
• Some codes may have only limited functions. Try other codes that may have more functions.
[-_n [._1"; _ I_!flf._lt_
This function searches for codes one by one if none of the codes listed for your device has
worked.
1) Manually turn on the device.
2) Change the remote control mode according to the device. Press MODE to select the correct
mode.
3) Activate the search code function. Press and hold POWER and RETURN+/TV until the mode
indicator blinks.
4) Point the remote at the device and press POWER. If no response, try the next code by
pressing _ and POWER until the device turns off.
5) Press RETURN+/TV to register and set the code. Then the MODE indicator light goes out.
Notes:
• If your remote still doesn't work with the "Search Code Function", use the remote that came
with your device. Your TV remote can not be guaranteed to work with all devices, modes or
operations.
52