Table of Contents
Advertisement
Note: Switch the system off if you install a
snowplow or similar object in such a way
that it may block the radar sensor. Your
vehicle remembers the selected setting
across key cycles.
Blocked Sensors
E311873
1
Camera.
2
Radar sensor.
Camera Troubleshooting
The windshield in front of the camera is
dirty or obstructed in some way.
The windshield in front of the camera is
clean but the message remains in the
display screen.
2025 F-650/750 (TBC) , enUSA, Edition date: 202310, First-Printing
Driving Aids
Cause
If a message regarding a blocked sensor
or camera appears in the instrument
cluster display, the radar signals or camera
images are obstructed. With a blocked
sensor or camera, the pre-collision assist
system may not function, or performance
may reduce. The following table lists
possible causes and actions for when this
message displays.
Clean the outside of the windshield in front
of the camera.
Wait a short time. It may take several
minutes for the camera to detect that there
is no obstruction.
175
Action
Advertisement
Table of Contents
