Tuneroperations
IMPORTANT
Be_re using the remote control R_rthe
following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press FM/AM
AUDIO
FM/AM
NOTE
• When FM or AM is selected as the source, you can select All Channel
Stere() (ALL ST) and SURR OFF mode.
The buttons described
below are used on pages 39 to 40.
]
FM/AM
MEMORY
Remote
control
mode selector
= TUNING @/@
FM MODE
Number
buttons
Press FM/AM repeatedly
to select the
band.
Example:
When the system is tuned in to 810 kHz.
'_
810,_
2
Press TUNING
@/@ repeatedly
until
you find the frequency
you want.
When you hold down the button until the system stm'ts
searching f'or stations and then release it, the system stops
searching automatically when a station of sufficient signal
strength is tuned in to.
NOTE
• When an FM stereo program isreceived,/he ST indicator lights on/he
display window.
39