6.1.7 Ised; Iso; Rohs; Other Approvals - Siemens SIMATIC NET RUGGEDCOM RX1536 Equipment Manual

Certification
6.1.7 ISED
6.1.7 ISED
This device is declared by Siemens Canada Ltd. to meet the requirements of the
following ISED (Innovation Science and Economic Development Canada) standard:
•
6.1.8

ISO

This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
•
6.1.9

RoHS

This device is declared by Siemens Canada Ltd. to meet the requirements of the
following RoHS (Restriction of Hazardous Substances) directives for the restricted use
of certain hazardous substances in electrical and electronic equipment:
•
•
Declarations of conformity for each directive are available online via
Industry Online Support
6.1.10

Other Approvals

This device meets the requirements of the following additional standards:
•
•
•
•
42
CAN ICES-3 (A)/NMB-3 (A)
ISO 9001:2015
Quality management systems – Requirements
EU RoHS Directives (EU) 2011/65 and (EU) 2015/863
European Directive for Restriction of Hazardous Substances
China RoHS (relating to SJ/T 11364)
Management Methods for the Restriction of the Use of Hazardous Substances in
Electrical and Electronic Products
[https://support.industry.siemens.com/]>.
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications
Networking Devices in Electric Power Substations
IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
IEC 61850-3
Communication Networks and Systems in Substations – Part 3: General
Requirements
NEMA TS-2
Traffic Controller Assemblies with NTCIP Requirements
Siemens
RUGGEDCOM RX1536
Equipment Manual, 10/2023, C79000-G8976-1488-07