Table of Contents
Advertisement
FmSmalSciiu
*
Mower Installation
Mower Installation
CONTENT OF SECTION
This section tells you how to install and remove
your mower. Instructions are given first on how to
install the 36 inch (914 mm) mower, followed by in¬
structions on how to install the 42 inch (1067 mm)
mower. Instructions on how to remove your mower
are last.
INSTALLING 36 INCH MOWER
1.
Place your tractor and mower on a smooth,
hard surface, such as concrete, with the mower
on the right side of the tractor.
2.
Turn the front wheels of the tractor as far as
they go to the left. Place mower in lowest cut¬
ting position.
3.
Slide the mower under the tractor (see figure 1).
4.
Slip the lift link into the lift lever arm and
attach the lift chain to the lift link (figure 2).
5.
Attach the mower hitch to the rear holes in the
front axle mounting points (figure 3), using the
two pins and safety clips provided.
6.
Slip the mower drive belt on the engine PTO
pulley (figure 3).
7.
Install the PTO rod onto the mower PTO arm
and the PTO lever (use front hole in PTO lever,
as shown in figure 4).
8.
Adjust PTO rod guide tension and belt stops as
necessary as outlined in the Adjustments sec¬
tion of this manual.
Figure
3. Attaching
Mower
6
Advertisement
Table of Contents
