Step 5 Selecting Tv Screen Type; E Eae - Panasonic DMR-T3040 Operating Instructions Manual

16
RQT6637.
STEP 5 Selecting TV screen type
Change the settings if you:
e Connect the unit to a widescreen 16:9 aspect television.
Set "TV Aspect" to "16:9".
eConnect the unit through the COMPONENT VIDEO OUT
terminals {page 11) to a television compatible with progressive
video signals (480P).
Set "TV Type" to "480P".
1 Press [SET UP] to show the menus.
2 Press [A, V] to select "TV Screen"
and press [>].
[ (9 RannciMül ied 3)
[ Ema Ba for DVU-Video KELLNE
isc E for DVD-RAM feta
TV Aspect _
3 Press [A, V] to select "TV
Aspect" and press [ENTER].
Mic Mannal E] E
[L ERU E
Misc &
MVidco Be
O AIA
T. i
` TV Screen il
4 Press [A, V] to select "16:9" and
press [ENTER].
TV Type
3 Press [A, V] to select "TV Type" and
press [ENTER].
4 Press [A, V] to select "480P" and
press [ENTER].
e When playing back, select Video in the on-screen menu
and set "Transfer" according to the type of material being
played {page 52).
To return to the previous screen
Press [RETURN].
When you are finished
Press [SET UP].
B Regarding Progressive Television Picture
Progressive image aspect (height to width ratio) is set at a standard
16:9. DVO-Video which has been set at 16:9 will be displayed
correctly. However, 4:3 video material (-> below) will be stretched to
the right and left when displayed.
To view the picture at the right aspect
e For televisions that allow the aspect of progressive images to be
adjusted, use the function provided on the television and adjust
as necessary.
e For televisions which do not allow the aspect of progressive
images to be adjusted, please turn OFF "Progressive"
(page 52).
4:3 video materials are usually found
in genera! television broadcasts (excluding some wide picture
broadcasts) and any pictures from discs that recorded such
programs.
ein DVDs with an aspect ratio of 4:3 indicated on the jacket.
e DVD-R or Video CD pictures