z
©
©
Recording f romexternal
equipment
Check that the disc has enough available space for the
recording. Acl_jttstthe recording mode.
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE button to close the
disc tray.
\\_it until "LOAD"disappearsfrom tilefront panel
displa}:
If an unusedDVD-EkMdisc is used, whether to format
or not will beasked first.(Seepage 31)
If an unusedDVD-RW discis used,whether to initialize
or not will beasked first.(Seepage 31)
3
Press the INPUT
button
to select the input
source
according
to the connection
you
made.
Tile front panel display changes m the following
sequence:
F Channel Number --*L1 --, L2 --, DV i]
Press the REC button.
To stop recording
Press the STOP ( @ ) button to stop or finish a recording
in progress.
,, \Vhen using DVD-RAM/DVD-R\V/DVD-R
discs, the
message 'Updating the information
of disc. Please wait
for a moment
is displayed
ROTE
•
"_Zm call not change the recording mode and
input source while recording.
•
Recording will stop automatically if there is no
free space left for recording.
•
Up to 99 titles can be recorded onto a disc.
•
Recording will stop automatically if a copy
protected image is selected.
•
DVD-IL_M/DVD-RW discs m_.lstbe fi_)rmatted
before starting to record. Most new discs are
sold unformatted.
Do not use DVD-R authoring
discs ",,,ith this
unit.
If you connect a digital calncorder, press the
INPUT button to select DV. (See page 35)
4
Press the REC MODE button repeatedly, (or
press the REC MODE button and then press
the At' button) to select the recording
speed(quality).
F SP -_ LP -_ EP -_ XP -j
a4-
Ellghsh