Table of Contents
Advertisement
HEADSET OPERATION
Your SBC9030 is equipped with a
2.5mm Headset Jack for use with an
optional accessory Headset for hands
free operation.
If you choose to use the Headset
option, you must obtain an optional
accessory Headset, which is compatible
with the SBC9030.
To purchase a Headset, call
800-667-2118.
Once you have a compatible 2.5mm
Headset, locate the Headset Jack on
the SBC9030 Handset. Connect the
plug on the Headset cord to the jack on
the cordless Handset. The plug should
fit securely. Do not force the connec-
tion.
OPERATION
NOTE:
Whenever a compatible
Headset is connected to the cordless
Handset, the microphone on the Handset
will be muted. This is done to limit the
effect of background noise.
The
following
operational
characteristics apply to compatible
Headsets. The same may also apply to
other headsets, but SBC assumes no
responsibility for their performance.
PHONE
OFF
BELT CLIP
The SBC9030 is also equipped with a
detachable belt clip. Align the pins on
the inside edge of the clip with the notches
on the sides of the SBC9030 Handset.
The belt clip should snap securely into
place. Do not force the connection.
3 3
Advertisement
Table of Contents
