Edit A Number/Name Stored The Directory - VTech vt2468 User Manual

TELEPHONE DIRECTORY
4
When you finish entering the name, press
PROG/CHAN
5
Enter the telephone number. Use
correction. Press
sequence.
—OR—
REDIAL/PAUSE
Press
SELECT
6
Press
7
Press or
the phone to alert you to calls from this number by changing to a
distinctive ringing pattern after the first ring. Choose
for a normal ringing pattern.
8 SELECT
Press
chose in Step 7,a
Note:
When memory is full the screen displays
tone sounds, and you will not be able to store a new number until you delete a
stored number.
Edit a Number/Name Stored in the Directory
1
Press (DIR). The screen displays
2
Press or
stored in memory
—OR—
Press the dial pad key for the first letter of the entry you want to edit.
3
When the screen displays the number you want to edit, press
SELECT
. Then press
EDIT
SELECT
4
Press
flashing cursor appears at the end of the name. Use
the dial pad keys to edit the name. Press
edit the number. Press
Ring setting.
SELECT
5
Press
.The screen displays
REDIAL/PAUSE
to display the last number dialed from this phone.
PROG/CHAN
or
and the current setting.
to change the setting. Choose
PROG/CHAN
or
will be displayed with the directory entry.
to scroll alphabetically through entries
or
PM OLD
. The screen displays the name and number. The
SELECT
to save the edited information.
SELECT
to backspace and make a
to store a pause in the dialing
. The screen displays
to confirm your selection. If you
until
SELECT
to move to edit the Distinctive
16
or
.
(for Yes) if you wish
(for No)
, an error
.
flashes.
, and
to move on to