VTech vt2463 User Manual page 6

3. Charge the handset battery.
Place the handset in the base. Charge the battery for at least 12 hours the first time.
4. Check for dial tone
After the batteries are charged, connect the modular telephone cord between a live
phone jack and the jack located on the bottom of the Base Unit. Pick up the Handset
and press PHONE. You should hear a dial tone.
5. Set the dial mode.
If you have touch tone service, the phone is ready to use as soon as the batteries are charged.
If you have dial pulse (rotary) service, you'll need to change the dial mode.
• Press PROG/CHANNEL on the handset to enter programming mode.
• Press or
• Press SELECT. The current setting blinks.
• Press to select
• Press SELECT to save the displayed mode.
Table/Desk Installation
until the screen displays
(or
6
INSTALLATION
:
and the currently selected mode.
).