Record Your Announcement - VTech vt2463 User Manual

ANSWERING SYSTEM OPERATION
AT THE BASE

Record Your Announcement

NOTE: If you have assigned different mailboxes to people, be sure to
tell callers in your announcement to press
announcement is playing to leave a message in the appropriate
mailbox.
1 MENU
Press
MEMO/REC
2
Press
beep, speak toward the base to record an announcement up to 90
seconds long.
NOTE: You may wish to leave several seconds of blank time at the end
of your recorded announcement to allow callers enough time to select
a mailbox.
MAIL BOX
3
Press any
back your recorded message.
To review your announcement at any time:
MENU
1
Press
2 MAIL BOX
Press any
To delete your announcement:
DELETE
Press
the pre-recorded announcement until you record a new one.
until you hear " Set Outgoing Message ."
. After you hear "Now recording" followed by a
button to stop recording. The system plays
until you hear " Set Outgoing Message ."
button.
during announcement playback. The system will use
* 1 * 2 * 3
, , or
21
while the