Table of Contents
Advertisement
To cancel the edit mode
Press s
ished.
■
top button (■) after recording has fin-
How to prepare the cassette deck for
recording
1. Insert the cassette tape into the cassette holder of the deck for
the synchro-edit-recording. (Be sure the tape is rewound.)
2. Select the noise-reduction system and the reverse mode
(
).
3. Check to be sure that the forward-side indicator (►) of the deck
to be used is illuminated.
4. Set the cassette deck to the recording standby mode.
(Refer to operating instructions for the cassette deck to be used.)
To enter desired recording time other
than 46, 60 or 90 minutes
Press TAPE LENGTH to select "C-" then press
the numeric buttons to enter the tape's total play¬
ing time in minutes.
TAPE LENGTH
K
O
^
1
2
3
4
6
>10
'
I
I
I
I
□
I
•
f
•
t
10
0
l-1
I
l~T"
II
I
:or example:
"o enter C-52, press
' you make a mistake, select "C-" again and enter the correct
umber.
If the cassette deck has no SYNCHRO
EDIT terminal
Press the play button of the cassette deck at the
same time as pressing play button (►) on the CD
player to start recording.
•When the deck has reverse mode, set to one-way (
^
).
•When the recording for side A is finished, the CD player will go to
the pause mode. The cassette deck will keep recording.
•To record on side B, first press the stop button on the cassette
deck, then start recording again on side B while at the same time
pressing play button (►) on the CD player.
Advertisement
Table of Contents
