Sony CCD-TR814 Operation Manual page 40

Maintenance Information and Precautions
Removing Dust from inside the Viewfinder
— CCD-TR514/TR614/TR814 only
(1) Remove the screw with a screwdriver (not supplied). Then, while sliding the RELEASE knob,
turn the evecup in the direction of the arrow and pull it out.
(2)
Clean the surface with a commercially available blower.
To Reattach the Eyecup
(1) Align the groove on th eyecup with the • mark on the barrel.
(2)
Turn the eyecup in the direction of the arrow. Then, replace the screw.
Caution
Do not remove any other screws. You may remove only the screw to remove the eyecup.
40