Table of Contents
Advertisement
Headset Operation
Your ip 5850 Handset is equipped with a 2.5mm Headset Jack for use with an
optional accessory Headset for hands-free operation. If you choose to use the
Headset option, you must obtain an optional accessory Headset, which is com-
patible with the ip 5850. For best results use a VTech 2.5 mm headset.
To purchase a Headset, call VTech Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on
the ip 5850 Handset. Connect the plug on the Headset cord to the jack (under a
small rubber flap) on the cordless Handset. The plug should fit securely. Do not
force the connection.
NOTE:
• Whenever a compatible Headset
is connected to the cordless
Handset, the microphone on the
Handset will be muted. This is
done to limit the effect of
background noise.
• When a compatible Headset is
connected to the cordless
Handset, your Speakerphone
feature will be disabled. To use
your Speakerphone feature,
simply disconnect the Headset
from the Handset.
Belt Clip
The ip 5850 is also equipped with a
detachable belt clip. Align the pins
on the inside edge of the clip with
the notches on the sides of the
Handset. The belt clip should snap
securely into place. Do not force the
connection.
32
Advertisement
Table of Contents
