Table of Contents
Advertisement
Setup
Installation of Battery Cells in Handset
Charging of the Handset Battery Cells
The Handset of your cordless telephone is powered
by rechargeable battery cells. It charges automati-
cally whenever the Handset is in its charger or Base
Unit.
You should charge the battery pack for 10-12
hours when you first receive your phone. You
will know the battery pack needs charging when:
• The low battery message is displayed:
• The Handset seems completely dead, the LCD is completely clear and does
not activate when you press the keys.
NOTE: When in LOW BATTERY mode, the keypad sounds, backlighting and
speakerphone features will not work. When your battery has been charged, your
features will return to their normal function.
IMPORTANT:
1. Do not dispose of battery cell in a fire, the cell may explode.
2. Do not open or mutilate the battery cell. Toxic substances may be released,
causing harm to eyes or skin.
3. Exercise care in handling battery cell in order to prevent an accidental short of
the charge contacts, potentially causing the battery pack to overheat.
Follow the steps below:
1. Place the new battery cells in the
Handset with the positive and nega-
tive poles aligned in the battery com-
partment.
2. Replace the battery cover by sliding it
upwards.
3. If the new battery cells are not already
charged, place the Handset in its
Charger or Base Unit, and allow it to
charge for 10-12 hours. After initial
charge, a maintenance charge of 8
hours should be sufficient.
WARNING: Alkaline batteries must
NOT be used in your ip 5825 cordless
telephone. Use only the batteries that
came with your phone, or contact our
Customer Support Center (contact in-
formation on page 2) to order addi-
tional batteries.
8
Advertisement
Table of Contents
