Indicator
Name
System Message
Indicator
Turn Signal and
Hazard Warning
Indicators
High Beam
Indicator
Lights On
Indicator
Fog Light
Indicator
*
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
On/Blinking
• Comes on for a few seconds
when you turn the ignition switch
to ON
(
w
*1
, then goes off.
• Comes on along with a beep
when a problem is detected. A
system message on the driver
information interface appears at
the same time.
• Blinks when you operate the turn
signal lever.
• Blink along with all turn signals when
you press the hazard warning button.
• Comes on when the high beam
headlights are on.
• Comes on whenever the light
switch is on, or in AUTO when
the exterior lights are on.
• Comes on when the fog lights are
on.
Explanation
• While the indicator is on, press the
(display/information) button to see the
message again.
• Refer to the Indicators information in this
chapter when a system message appears
on the driver information interface. Take
the appropriate action for the message.
• The driver information interface does not
return to the normal screen unless the
warning is canceled, or the
is pressed.
• Does not blink or blinks rapidly
2 Replacing Light Bulbs P. 540, 542, 543
—
• If you remove the key from the ignition
switch
*1
while the exterior lights are on, a
chime sounds when the driver's door is
opened.
*
2 Fog Lights
P. 161
uuIndicatorsu
Message
—
button
—
—
—
—
Continued
87