Olympus Stylus 1000 Advanced Manual page 55

Lamp indicators
This camera uses several lamps to indicate the camera status.
Lamp
Self-timer lamp
Card access lamp
Green lamp of the
monitor
Extending the useful life of the battery
• Performing any of the following operations when not actually taking pictures can deplete
the battery power.
• Repeatedly pressing the shutter button halfway
• Repeatedly using the zoom
• To minimize the battery consumption, turn off the camera whenever it is not in use.
Functions that cannot be selected from menus
• Some items may not be selectable from the menus when using the arrow pad.
• Items that cannot be set with the current shooting mode
• Items that cannot be set because of an item that has already been set:
[%], "flash", etc.
• Items that cannot be set because the pictures taken by other camera will be edited.
• Some functions cannot be used when there is no card in the camera.
[PANORAMA], [PRINT ORDER], [ALBUM] [ALBUM ENTRY], [UNDO ENTRY],
[LABEL IMAGE], [FORMAT], [BACKUP]
The lamp lights for approximately 10 seconds, blinks for
approximately 2 seconds, and then the picture is taken.
Blinking: An image or movie is being recorder or
downloaded (when connected to a computer).
• Do not do any of the following while the card access lamp is
blinking. Doing so may prevent the image data from being
saved and render the internal memory or card unusable.
• Open the battery compartment/card cover
• Remove the battery.
• Connect or disconnect the AC adapter.
Lit: The focus and exposure are locked.
Blinking: The focus and exposure are not locked.
• Release your finger from the shutter button, re-position
the AF target mark on the subject and press the shutter
button halfway again.
Status
55
EN