Yamaha R7 2024 Owner's Manual page 27

4. Push the "SEL" switch to confirm
the selected setting value and cy-
cle to the next setting in the order
listed above.
TIP
The settings mode will exit after all set-
tings are confirmed.
Display brightness
1
1. Display brightness
An brightness level indicator bar will
appear at the bottom of the display.
Use the "RES" switch to select the de-
sired brightness level and push the
"SEL" to confirm it.
Instrument and control functions
Shift timing indicator light
The shift timing indicator light has 3
settings:
 ON setting: the shift timing indica-
tor light will come on when the set
engine speed is reached. When
this setting is selected, the indica-
tor light will come on and stay on
until the next setting is selected
using the "RES" switch or con-
firmed with the "SEL" switch.
 FLASH setting: the shift timing in-
dicator light will flash when the set
engine speed is reached. When
this setting is selected, the shift
timing indicator light will flash 4
times per second until the next
setting is selected using the "RES"
switch or confirmed with the
"SEL" switch.
 OFF setting: the shift timing indi-
cator light is deactivated. When
this setting is selected, the shift
timing indicator light will flash
once every 2 seconds until the
next setting is selected using the
"RES" switch or confirmed with
the "SEL" switch.
4-9
Shift timing indicator light ON r/min
The shift timing indicator light can be
set between 6000 r/min and 12000
r/min in increments of 200 r/min. While
changing this setting, the shift timing
indicator light will come on and stay on
and the selected increment will be dis-
played on the tachometer.
Use the "RES" switch to select the de-
sired engine speed for activating the
shift timing indicator light.
Shift timing indicator light OFF r/min
The shift timing indicator light can be
set between 6000 r/min and 12000
r/min in increments of 200 r/min. While
changing this setting, the shift timing
indicator light will flash and the select-
ed increment will be displayed on the
tachometer.
Use the "RES" switch to select the de-
sired engine speed for deactivating the
shift timing indicator light.
TIP
Be sure to set the OFF r/min to a higher
engine speed than the ON r/min setting
otherwise the shift timing indicator light
will not come on while riding.
4