Yamaha VIKING VI 2021 Owner's Manual page 37

Odometer and tripmeters
1
2
3
1. "SELECT" button
2. "RESET" button
3. Odometer/Tripmeter A/Tripmeter B/Error code display
The odometer shows the total distance trav-
eled by the vehicle. The odometer can be
used for maintenance and service intervals.
The tripmeters show the distance traveled
since they were last reset. The tripmeters can
be used to record the distance traveled on a
single trip, or to estimate the distance that
can be traveled with a full tank of gas, etc.
Push the "SELECT" button to switch between
the odometer "ODO" and the tripmeters
"TRIP A" and "TRIP B" in the following order:
ODO → TRIP A → TRIP B → ODO
To reset a tripmeter, set the display to the
tripmeter you want to reset, then push the
"RESET" button until it is reset.
TIP
 The odometer will lock at 99999.
 The tripmeters will reset and continue
counting after 9999.9 is reached.
5-7
5