Replacing The Rear Panel Power Sensor Cable Assemblies (Options 002 And 003) - HP EPM E4418A Service Manual

Replaceable Parts
Assembly and Disassembly Guidelines
Replacing the Rear Panel Power Sensor Cable Assemblies
(Options 002 and 003)
1. Disassemble the power meter to allow access to the rear panel
connectors. This is done by following steps 1 through 3 of the A4
interface assembly removal procedure on page 5-10.
2. Replace the power sensor cable assembly(s) using the replacement
kits. The inner recess on the power sensor cable is used to locate
the circlip when assembling to the rear chassis.
5-18 HP EPM-441A/442A Service Guide