Table of Contents
Advertisement
Error code
Detailed error
code
HC
00
CJ
02
H1
00
AA
02
HJ
08
HJ
09
HJ
10
89
02
A1
00
AH
00
89
03
INFORMATION
In case of error code AH and no interruption of the
disinfection function occurred due to domestic hot water
tapping, following actions are recommended:
▪ When the Domestic hot water > Setpoint mode >
Reheat or Reheat + sched. is selected, it is
recommended to program the start-up the disinfection
function at least 4 hours later than the last expected
large hot water tapping. This start-up can be set by
installer settings (disinfection function).
▪ When the Domestic hot water > Setpoint mode >
Scheduled only is selected, it is recommended to
program a Storage eco 3 hours before the scheduled
start-up of the disinfection function to preheat the tank.
13
Glossary
Dealer
Sales distributor for the product.
ERHQ011~016BA + ERLQ011~016CA + EHVH/X16S18+26CA
Daikin Altherma - Low Temperature Split
4P313777-1C – 2012.11
Description
Tank temperature sensor
problem.
Please contact your dealer.
Room temperature sensor
problem.
Please contact your dealer.
External temperature
sensor problem.
Please contact your dealer.
External backup heater
overheated.
Please contact your dealer.
Water circuit pressure
is too high.
Water circuit pressure is
too low.
Water pressure sensor problem.
Please contact your dealer.
Heat exchanger frozen.
EEPROM reading error.
Tank disinfection function not
completed correctly.
Heat exchanger frozen.
Authorized installer
Technical skilled person who is qualified to install the
product.
User
Person who is owner of the product and/or operates the
product.
Applicable legislation
All international, European, national and local directives,
laws, regulations and/or codes that are relevant and
applicable for a certain product or domain.
Service company
Qualified company which can perform or coordinate the
required service to the product.
Installation manual
Instruction manual specified for a certain product or
application, explaining how to install, configure and maintain
it.
Operation manual
Instruction manual specified for a certain product or
application, explaining how to operate it.
Accessories
Labels, manuals, information sheets and equipment that are
delivered with the product and that need to be installed
according
to
the
instructions
documentation.
Optional equipment
Equipment made or approved by Daikin that can be
combined with the product according to the instructions in
the accompanying documentation.
Field supply
Equipment not made by Daikin that can be combined with
the
product
according
accompanying documentation.
13 Glossary
in
the
accompanying
to
the
instructions
in
the
Installer reference guide
65
Advertisement
Table of Contents
