Connecting To A 2-Channel Stereo Receiver/Tv; Getting Connected - VocoPro DVG-380K User Manual

Vocopro dvg-380k: user guide
Table of Contents

Advertisement

Getting Connected

The DVG-380K can be used as both a home entertainment DVD player and a Karaoke player/mixer. Since DVD
audio is optimal with a digital connection (especially if you have an AC-3 or DTS receiver), it is common for the
audio connection to be either Coaxial or Digital.
Karaoke, on the other hand, requires an analog audio connection in order to output a mixed microphone signal
along with the audio source. This would mean that one would need BOTH a digital audio and analog audio
connection in order to enjoy both DVD quality audio AND Karaoke entertainment. Below are instructions for
connecting to both analog and digital devices. (Ensure there is no power to the involved components)
Before making connections
Ensure that all units to be interconnected are not plugged into an AC outlet.
Insert interconnecting plugs completely into the receiving jacks. Loose connections may produce a humming
sound or other noise interference.
When using an optical connection, remove the dust cap from the optical digital out jack on the rear of the
DVG-380K. Keep the cap in a secure place. When not using optical connections, the dust cap should be in place.
Keep instructions from other equipment handy for reference.
5.1CH AUDIO OUT
COMPONENT/PROGRESSIVE
Y
Cb/Pb
Cr/Pr
FL
FR
SW
SL
SR
CENTER
L
R
AUDIO OUT
COAXIAL
WHITE
Plug

Connecting to a 2-Channel Stereo Receiver/TV

Using the supplied RCA patch cable, connect one set of red & white RCA plugs to the RCA AUDIO
OUTPUT jacks on the DVG-380K. Connect the other set of red & white RCA plugs to the AUDIO INPUT
jacks on your stereo receiver/TV. Depending on the stereo receiver/TV, the audio input jacks may be
labeled AUDIO, LINE, AUX, VIDEO 1/2/3.
5.1CH AUDIO OUT
COMPONENT/PROGRESSIVE
FL
FR
SW
Y
Cb/Pb
SL
SR
CENTER
L
AUDIO OUT
Connecting to an AC-3/DTS Receiver Using Digital Output
Using either an RCA-ended Coaxial cable suited for digital audio use or an Optical cable, connect
one end to the appropriate jack on the DVG-380K (Coaxial or Optical) and the other end to the
appropriate jack on the AC-3/DTS receiver (Coaxial or Optical). If you have both Coaxial and Optical
Inputs on your AC-3/DTS Receiver, it is recommended to use an Optical connection as those cables
eliminate the possibility of EMI (electromagnetic interference). NOTE: Digital audio output
(Coaxial/Optical) will not be a mixed signal (source audio output mixed with microphone output). To
have the microphone output mixed with source audio, you will need to have an RCA analog
connection to your amplifier/receiver. Both audio connections can be present simultaneously using
the Setup Menu to select between the two.
15
VIDEO
"DTS" and "DTS Digital out" are trademarks of Digital Theater Systems, Inc.
Manufactured under license from Dolby Laboratories
La Verne California U.S.A.
"Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories.
Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
S VIDEO
1
!
WARNING
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
VIDEO
OPTICAL
RED Plug
This connection is required for karaoke
Cr/Pr
VIDEO
"DTS" and "DTS Digital out" are trademarks of Digital Theater Systems, Inc.
Manufactured under license from Dolby Laboratories
"Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories.
Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
S VIDEO
1
!
WARNING
RISK OF ELECTRICAL SHOCK
R
DO NOT OPEN
COAXIAL
VIDEO
OPTICAL
Cable not included
WWW.VOCOPRO.COM
CLASS 1 LASER PRODUCT
DVD PLAYER
100-240V~
KLASSE 1 LASER PRODUCT
MODEL NO.: DVG-380K
LUOKAN 1 LASER LAITE
50/60Hz
POWER SUPPLY: 100-240V50/60Hz
KLASS 1 LASER APPARAT
POWER CONSUMPTIONS: 28W
VGA OUTPUT
SERIAL NO.
WWW.VOCOPRO.COM
La Verne California U.S.A.
CLASS 1 LASER PRODUCT
DVD PLAYER
KLASSE 1 LASER PRODUCT
MODEL NO.: DVG-380K
LUOKAN 1 LASER LAITE
POWER SUPPLY: 100-240V50/60Hz
KLASS 1 LASER APPARAT
POWER CONSUMPTIONS: 28W
VGA OUTPUT
SERIAL NO.
TV/VCR/Receiver
100-240V~
50/60Hz
AC-3/DTS Receiver

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents