Audio Setup - VocoPro DVG-380K User Manual

Setup Options
Audio Mode
Select LT/RT for channel specific audio playback. This setting is commonly chosen for karaoke applications.
Select Stereo for standard two-channel stereo playback.
Select VSS for a virtual surround-sound playback.

Audio Setup

Audio Output
Select Analog for stand audio playback where no digital connections are available. This is necessary for
karaoke applications.
Select SPDIF/RAW for audio playback with a digital(optical/coaxial) connections.
Select SPDIF/PCM for audio playback with a digital(optical/coaxial) connections.
LPCM Output
Select LPCM 48k for digital audio devices with a maximum sampling rate of 48k.
Select LPCM 96k for audio playback with devices that support 96k sampling rate. LPCM 96k is optimized for
progressive scan playback.
SPEAKER SETUP PAGE
DOWNMIX LT/RT
CENTER STEREO
REAR VSS
SUBWOOFER OFF
CNTR DELAY
REAR DELAY
TEST TONE
MAIN PAGE
AUDIO SETUP
AUDIO OUT ANALOG
LPCM OUT SPDIF/RAW
SPDIF/PCM
MAIN PAGE
AUDIO SETUP
AUDIO OUT
LPCM OUT LPCM 48K
LPCM 96K
MAIN PAGE