Cisco Nexus 93108TC-FX3 Hardware Installation Manual page 58

Fan Module LEDs
Fan Module LEDs
The fan module status LED is located on the front of the module.
LED
Status
Power Supply LEDs
The power supply LEDs are located on the left right portion of the power supply. Combinations of states
indicated by the Okay and Fault LEDs indicate the status for the module as shown in the following table.
OK LED
Green
Flashing
green
Off
Off
Off
Cisco Nexus 93108TC-FX3 NX-OS Mode Switch Hardware Installation Guide
52
Color Status
Green The fan module is operational.
Red The fan module is not operational (fan is probably not functional).
Off Fan module is not receiving power.
FAIL or FAIL/ID Status
LED
Off Power supply is on and outputting power to the switch.
Off Power supply is connected to an AC power source but not outputting power
to the switch. The power supply may not be properly installed in the chassis.
Off Either all the installed power supplies are not receiving power or an
uninstalled power supply is not receiving power.
Flashing amber Power supply is operating but a warning condition has occurred—possibly
one of the following conditions:
• High temperature
• High power
• Slow power supply fan
• Low voltage
• Power supply is installed in the chassis but was disconnected from
Flashing amber Power supply is installed without a connection to a power source.
(10 seconds)
then amber
the power source.
LEDs