Cisco Nexus 93108TC-FX3 Hardware Installation Manual page 22

Network Equipment-Building System (NEBS) Statements
Warning
Statement 7012 Equipment Interfacing with AC Power Ports
Connect this equipment to AC mains that are provided with a surge protective device (SPD) at the service
equipment that complies with NFPA 70, the National Electrical Code (NEC).
Note
Statement 7013 Equipment Grounding Systems—Common Bonding Network (CBN)
This equipment is suitable for installations using the CBN.
Note
Statement 7014 Installation Location Outside Plant (OSP)
This equipment is suitable for installation in OSP locations.
Note
Statement 7015 Equipment Bonding and Grounding
When you use thread-forming screws to bond equipment to its mounting metalwork, remove any paint and
nonconductive coatings and clean the joining surfaces. Apply an antioxidant compound before joining the
surfaces between the equipment and mounting metalwork.
Note Statement 7016—Battery Return Conductor
Treat the battery return conductor of this equipment as DC-I.
Note Statement 7018 System Recover Time
The equipment is designed to boot up in less than 30 minutes provided the neighboring devices are fully
operational.
Note Statement 7019 Equipment Grounding Systems—Isolated Bonding Network (IBN)
This equipment is suitable for installations using the IBN.
Note Statement 8015 Installation Location Network Telecommunications Facilities
This equipment is suitable for installation in network telecommunications facilities.
Cisco Nexus 93108TC-FX3 NX-OS Mode Switch Hardware Installation Guide
16
Installing the Chassis