Blower Replacement - Napoleon Elevation EX36 Series Installation Manual

maintenance
EN

10.5 blower replacement

WARNING
!
• Risk of fire and electrical shock!
• Turn off the gas and electrical power before servicing this appliance.
• Use only Wolf Steel approved optional accessories and replacement parts with this appliance. Using
non-listed accessories (blowers, doors, louvres, trims, gas components, venting components, etc.) could
result in a safety hazard and will void the warranty and certification.
• Ensure that the fan's power cord is not in contact with any surface of the appliance to prevent electrical
shock or fire damage. Do not run the power cord beneath the appliance.
• The wire harness provided in the blower kit is a universal harness. When installed, ensure that any excess
wire is contained, prevent it from making contact with moving or hot objects.
A. Turn off the power to the appliance.
B. Remove the safety barrier.
C. Remove the main door assembly.
D. Remove media and logs.
E. Remove the 4 screws securing the log support
assembly. Remove and set aside (Fig. 1).
F. This appliance is equipped with a left and right
blower. Remove the access plate from the side
being replaced (Fig. 2).
(Fig. 2)
Left blower
access plate
50
W415-2000 / J-0 / 02.08.24
SPECIFIC BLOWER INSTALLATION
INSTRUCTIONS MUST BE ADDED HERE.
THIS TEMPLATE MUST BE USED WITH ANY
APPLIANCE THAT OFFERS THE BLOWER AS
AN OPTION OR COMES STANDARD WITH THE
APPLIANCE... AS PER THE STANDARD.
(Fig. 1)
Bit Access
Bit Access
(x4)
Holes (x4)
35.1
Right blower
access plate
Log Support