Removing Transportation Safety Bolts - Beko CM 9100 B User Manual

4.1.2 Assembly of bottom panel covers
• In order to increase the sound comfort of the product, attach cover A after removing the package foam.
Cover A
• Cover B and the Cap are optional. If available, attach cover B and the Cap.
Cover B
Cap

4.1.3 Removing transportation safety bolts

1 Loosen all transportation safety bolts with an appropriate wrench until they turn freely.
2 Stretch the internal component by pressing on the holding areas and pull the component out.
3 Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel.
Remove the transportation safety bolts before operating the product! Otherwise, the product will get damaged.
Keep the transportation safety bolts in a safe place to reuse when the product needs to be moved again in the future.
WARNING
Install the transportation safety bolts in reverse order of the disassembly procedure.
Never move the product without the transportation safety bolts properly fixed in place!
Washing Machine / User's Manual
Tilt the machine back slightly. Rest the tabs of Cover A against the
lower panel. Complete the assembly by rotating the cover.
Rest the tabs of Cover B against the lower panel. Complete the
assembly by rotating the cover.
Insert the cap by pushing it with your finger.
11 / EN