Time Display; Starting The Programme - Beko CM 9100 B User Manual

Table of Contents

To deactivate bluetooth connection:

Press and hold Remote Control function button for 3 seconds. Countdown "3-2-1" will be displayed,

and then Bluetooth icon will disappears on the display.

First setup of the HomeWhiz application must be complete for the bluetooth connection to be activated. After setup, pressing

the remote control function button while the knob is at Download Programme/Remote Control position will automatically

activate the bluetooth connection.

4.3.9 End Time

Time display

Remaining time for the completion of the programme while it is running is displayed as "01:30" in hours and

minutes format.

Programme time may differ from the values in section "Programme and consumption table" depending on the water

pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected

and the changes at the mains voltage.

With the End Time function, the startup of the programme may be delayed up to 24 hours. After pressing End

Time button, the programme's estimated ending time is displayed. If the End Time is set, End Time indicator

is illuminated.

In order for the End Time function is activated and the programme is completed at the end of the specified

time, you must press Start/Pause button after adjusting the time.

If you want to cancel End Time function, turn the knob to on and off position. machine.

When you have activated the End Time function, do not add liquid detergent in the powder detergent compartment no 2.

There is the risk of staining of the clothes.

1 Open the loading door, place the laundry and put detergent, etc.

2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.

3 Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.

4 Press Start / Pause button. Time countdown starts. ":" sign in the middle of the end time on the display

starts flashing.

Additional laundry can be added into the machine during the End Time countdown. At the end of the countdown, End Time

indicator turns off, washing cycle starts and the time of the selected programme appears on the display.

1 Press Start / Pause button to start the programme.

2 The Start / Pause button's light which was off before starts to illuminate steadily now, indicating that the

programme has started.

3 Loading door is locked. The door lock symbol appears on the display after the loading door is locked.

Washing Machine / User's Manual

27 / EN

Table of Contents