Table of Contents
Advertisement
Quick Links
MO1208-EA
© 2012 CASIO COMPUTER CO., LTD.
•
To ensure correct direction readings by this watch, be sure to perform
bidirectional calibration before using it. The watch may produce incorrect
direction readings if you do not perform bidirectional calibration. For more
information, see "To perform bidirectional calibration" (page E-36).
•
Keep the watch away from audio speakers, magnetic necklace, cell phone,
and other devices that generate strong magnetism. Exposure to strong
magnetism can magnetize the watch and cause incorrect direction readings. If
incorrect readings continue even after you perform bidirectional calibration, it
could mean that your watch has been magnetized. If this happens, contact
your original retailer or an authorized CASIO Service Center.
E-2
Things to check before using the watch
1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under "Confi guring Home City Settings" (page E-17) to confi gure
your Home City and daylight saving time settings.
Important!
Proper World Time Mode, Sunrise/Sunset Mode, and Moon Age Mode data depend
on correct Home City, time, and date settings in the Timekeeping Mode. Make sure
you confi gure these settings correctly.
2. Confi gure latitude and longitude settings for your current location.
See "To select a Home City by confi guring latitude and longitude settings" (page
E-20).
E-4
Contents
E-3
About This Manual
E-4
Things to check before using the watch
E-11 Mode Reference Guide
E-16 Timekeeping
E-17 Confi guring Home City Settings
E-17
To confi gure Home City settings
E-19
To change the Daylight Saving Time (summer time) setting
E-20 Confi guring Latitude and Longitude Settings for Your Current Location
E-20
To select a Home City by confi guring latitude and longitude settings
E-22 Confi guring Current Time and Date Settings
E-22
To change the current time and date settings
E-6
E-52 Using Moon Data
E-52
To look up the Moon age on a specifi c date
E-54 Using the Alarm
E-54
To enter the Alarm Mode
E-55
To set an alarm time
E-56
To test the alarm
E-57
To turn an alarm and the Hourly Time Signal on and off
E-57
To stop the alarm
E-58 Using the Stopwatch
E-58
To enter the Stopwatch Mode
E-58
To perform an elapsed time operation
E-58
To pause at a split time
E-8
Operation Guide 5269
Congratulations upon your selection of this CASIO watch.
Warning!
•
The measurement functions built into this watch are not intended for taking
measurements that require professional or industrial precision. Values produced
by this watch should be considered as reasonable representations only.
•
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss suffered by you or any third party arising through the use of
this product or its malfunction.
About This Manual
•
Depending on the model of your watch, digital display
text appears either as dark fi gures on a light
background, or light fi gures on a dark background. All
sample displays in this manual are shown using dark
fi gures on a light background.
•
Button operations are indicated using the letters shown
in the illustration.
•
Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
3. Set the current time.
See "Confi guring Current Time and Date Settings" (page E-22).
The watch is now ready for use.
E-26 Hand Home Position Adjustment
E-26
To adjust home positions
E-29 Taking Direction Readings
E-30
To take a direction reading
E-36
To perform bidirectional calibration
E-38
To perform magnetic declination correction
E-43 Thermometer
E-43
To enter and exit the Thermometer Mode
E-45
To correct the temperature value
E-47 Specifying Temperature Unit
E-47
To specify the temperature unit
E-49 Looking up Sunrise and Sunset Times
E-49
To look up the sunrise and sunset times on a specifi c date
E-50
To toggle between sunrise time and sunset time
E-51
To view the sunrise/sunset time for a particular date
E-60 Using the Countdown Timer
E-60
To enter the Countdown Timer Mode
E-60
To specify the countdown start time
E-61
To perform a countdown timer operation
E-62
To stop the alarm
E-63 Checking the Current Time in a Different Time Zone
E-63
To enter the World Time Mode
E-64
To view the time in another time zone
E-64
To specify standard time or daylight saving time (DST) for a city
E-65 Illumination
E-65
To turn on illumination
E-66
To change the illumination duration
E-68 Button Operation Tone
E-68
To turn the button operation tone on and off
ENGLISH
E-1
E-3
E-5
E-7
E-9
Advertisement
Table of Contents
Related Manuals for Casio Sport SGW-500H-2BVER
Summary of Contents for Casio Sport SGW-500H-2BVER
- Page 1 • Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss suffered by you or any third party arising through the use of this product or its malfunction.
-
Page 2: Mode Reference Guide
Operation Guide 5269 Mode Reference Guide E-70 Troubleshooting E-75 Specifi cations Your watch has 9 “modes”. The mode you should select depends on what you want to do. To do this: Enter this mode: See: • View the current time and date in the Home City •... -
Page 3: Hand Home Position Adjustment
Operation Guide 5269 3. Use D (+) and B (–) to change the fl ashing value in 0.1° increments. Confi guring Latitude and Longitude Settings for Your Current Location Holding down D or B while the latitude or longitude setting screen is •... - Page 4 • You should perform bidirectional calibration in an environment that is the same as authorized CASIO Service Center. that where you plan to be taking direction readings. If you plan to take direction readings in an open fi eld, for example, calibrate in an open fi eld.
-
Page 5: Specifying Temperature Unit
Operation Guide 5269 Digital Compass Precautions Location Magnetic North and True North • Taking a direction reading when you are near a source of strong magnetism can The northerly direction can be expressed either as cause large errors in readings. Because of this, you should avoid taking direction True north True north magnetic north or true north, which are different from each... -
Page 6: Using The Alarm
Operation Guide 5269 Note To view the sunrise/sunset time for a particular date • Sunrise and sunset times are calculated in accordance with the current date based While the sunrise time or sunset time is displayed in the Sunrise/Sunset Mode, use B (+) and D (–) to scroll on the currently specifi... -
Page 7: Using The Countdown Timer
Operation Guide 5269 If a countdown is paused, press B to reset to the current countdown start Using the Countdown Timer • time. The countdown timer can be confi gured to start at a preset time and sound an alarm 2. -
Page 8: Troubleshooting
■ Why am I having problems taking direction readings indoors? • If ERR keeps appearing, contact your original dealer or nearest authorized CASIO A TV, personal computer, speakers, or some other object is interfering with terrestrial distributor to have the watch checked. - Page 9 Operation Guide 5269 UTC Offset/ City Name Latitude (°) Longitude (°) UTC Offset/ City Name Latitude (°) Longitude (°) GMT Differential North Latitude +, East Longitude +, GMT Differential North Latitude +, East Longitude +, South Latitude – West Longitude – South Latitude –...