To Remove The Stand Base - Vizio VP322 User Manual

Preparing Your PLASMA HDTV for Wall Mounting Preparing Your PLASMA HDTV for Wall Mounting Preparing Your PLASMA HDTV for Wall Mounting Preparing Your PLASMA HDTV for Wall Mounting

To remove the stand base

To remove the stand base
To remove the stand base To remove the stand base
1. Unplug all of the cables and cords
from your VIZIO VP322 Plasma
HDTV10A.
2. Place the VP322 PLASMA face down
on a soft and flat surface (blanket,
foam, cloth, etc) to prevent any
damage to the TV.
3. Remove the four (4) screws holding
the base to the VP322 PLASMA.
4. Carefully remove the stand base.
Now, the VP322 Plasma HDTV10A can fit
securely to a mount (sold separately) by
utilizing the mounting holes in the center of
the back panel of the High Definition TV.
Please make sure to read the instructions of
your specific mount to properly hang the
VP322 Plasma HDTV10A.
The pitch of the mounting holes is 400mm
horizontally and 200mm vertically.
The screw type required is metric M6, 20mm
long, 1.0mm pitch. The length of the screws
will depend on the thickness plate being
attach to the TV; our brackets come with
different length screws.
To find the perfect mount for the VIZIO VP322 Plasma, browse VIZIO's certified mount selection at
www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).
Version 4/8/2008 6
www.VIZIO.com
VIZIO VP322 HDTV10A User Manual