Preparing For Wall Mounting; To Remove Stand Base; Preparing Your Lcd Hdtv For Wall Mounting - Vizio VW32LHDTV40A User Manual

Preparing Your LCD HDTV for Wall Mounting

The VIZIO VW32L HDTV40A can either be kept on the stand base or mounted on the wall for viewing. If
you choose to mount the VW32L HDTV40A on the wall, please follow the instructions below for removing
the stand base.
To remove the stand base
1. Unplug all of the cables and cords
from your VIZIO VW32L HDTV40A.
2. Place the VW32L HDTV40A face
down on a soft and flat surface
(blanket, foam, cloth, etc) to prevent
any damage to the TV.
3. Remove the eight (8) screws holding
the base to the VW32L HDTV40A.
4. Carefully remove the stand base.
Now, the VW32L HDTV40A can fit securely to
a mount (sold separately) by utilizing the
mounting holes in the center of the back panel
of the High Definition TV. Please make sure to
read the instructions of your specific mount to
properly hang the VW32L HDTV40A.
The pitch of the mounting holes is 420mm
horizontally and 200mm vertically.
The screw type required is metric M8, 1.25mm
pitch. The length of the screws will depend on
the thickness plate being attach to the TV set,
our brackets come with different length
screws.
To find the perfect mount for the VIZIO VW32L HDTV40A, browse VIZIO's certified mount selection at
www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).
Version 10/17/2008
VIZIO
6
www.VIZIO.com
®
VW32L HDTV40A User Manual