Yamaha RMAX WOLVERINE 2021 Owner's Manual page 149

1 1 1
1. Tailpipe bolt
2. Remove the tailpipe by pulling it out of
the muffler, and then remove the gasket.
3. Tap the tailpipe lightly, and then use a
wire brush to remove any carbon depos-
its from the spark arrester portion of the
tailpipe and inside of the tailpipe housing.
1 1
1. Tailpipe
2. Spark arrester
3. Gasket
4. Install the gasket, and then insert the tail-
TIP
Make sure that the tailpipe is positioned at a
48° angle as shown.
9-38
2
1
pipe into the muffler and align the bolt
holes.
3
9