Continuously Variable Transmission (Cvt) - Yamaha RMAX WOLVERINE 2021 Owner's Manual

TIP
Oil will flow out immediately when the drain
bolt is loosened. Take care not to lose the
bolt.
4. After draining the oil, install the transmis-
sion oil drain bolt with a new gasket.
5. Tighten the drain bolt to the specified
torque.
Tightening torque:
Transmission oil drain bolt:
20 N·m (2.0 kgf·m, 15 lb·ft)
6. Refill the transmission with the specified
amount of the recommended oil.
9
7. Install the dipstick.
1. Arrow mark
8. Start the engine and let it idle while
checking for oil leakage.
9. Stop the engine and check the oil level
one last time.
10. Install the rubber cover and passenger
seat cushion.
EBU39520
Continuously Variable Transmission
(CVT)
The V-belt must be inspected at the intervals
specified in the periodic maintenance chart.
This requires special skills and knowledge, so
9-23
1