Troubleshooting - Westinghouse WPX3000e User Manual

MAINTENANCE
Maintenance parts can be purchased directly from the factory. A partial list of maintenance parts is below. For
a complete list of maintenance parts or for additional information email us at service@wpowereq.com or
call 1-855-944-3571.
Inlet Filter ..............................................................................................................................................04000267-0
Turbo Nozzle ................................................................................................................................................ PWTN
Nozzle Kit (includes soap, 0°, 15°, 25°, and 40° nozzles) ............................................................................... 8855
WARNING
Making unauthorized modifications and using incompatible accessories can damage the unit and void your warranty.

TROUBLESHOOTING

PROBLEM
Unit will not turn on.
The unit is running but
there is no water flow.
Water is leaking where
the hose connects to
the trigger handle.
The pressure washer
turns on for 2 seconds,
shuts off, and will not
turn back on.
18 | English
Do not use attachments or accessories that are not recommended for use with this product.
POSSIBLE CAUSE
Pressure washer is not connected to a power
source or the power source isn't grounded.
Water pressure is in the hose.
GFCI is tripped.
Defective motor or power cord.
Improper water source.
Clogged nozzle.
Defective spray lance.
Defective or missing O-ring between the high
pressure hose and the trigger handle.
The auto-start feature is turning the unit off.
CORRECTION
Connect the power cord to a grounded
120 Volt outlet.
Pull the trigger to release the water
pressure.
Press the RESET button on the power cord.
Contact Westinghouse customer service
toll-free at 1-855-944-3571.
Connect the pressure washer to a water
main. Do not use this device with water from
a lake, pool, pond, etc.
Clean the nozzle.
Replace the lance.
Replace the o-ring.
When the pressure washer is turned on, the
motor may run for 1 – 2 seconds to prime
the pump. Then it will automatically shut off
until the trigger handle trigger is squeezed.
This is normal and does not indicate a
problem.